Dromex – Maxi Full Face Reusable Respirator

Special Instructions

All respiratory selections should be read in conjunction with BS EN 529:2005 “Respiratory Protective devices – Recommendations for selection, use, care and maintenance”.
Do not use these respirators or enter in area where:
• The oxygen concentration is not known or is less than 19.5%.
• Contaminants or their concentrations are unknown or are known to be immediately dangerous to life or health.
• Particulate concentrations exceed levels fixed by the applicable health and safety regulations or protection factor 40 NPF whichever is lower.
• Gases and/or vapours are present except for respirators designated as protecting against vapours, in which case vapour concentrations should not exceed 20 NPF.
• The requirement for leak tightness is unlikely to be achieved if worn against a beard or facial stubble.
• Do not wear standard eye glasses with a full-face respirator
• Not to be used for firefighting.
• These respirators do not supply oxygen. Do NOT use in oxygen deficient atmospheres (e.g. tanks or other poorly ventilated areas).
• Do not use in explosive atmospheres.
• Do not modify or alter this device.

Compliance & Conformity

NRCS Homologated to SANS 50136:1998 CL1 as required by the Occupational Health and Safety Act, 1993 (Act No. 85 of 1993). EN136:2008 approved: Respiratory protective devices full face masks — Requirements, testing, marking quality system as per ISO9001:2008.

Specifications

• Type: Class1 full face masks for light duty use
• Material: Thermo Plastic Elastomer/Rubber
• Colour: Black
• Harness: 5-point comfort harness with 2 grip holes for easier fitting on and removing with gloves and accommodation of women’s hair (ability to wear a pony tail). Withstands a pull of up to 15KG or 150N
• Visor: Polycarbonate anti-fog and impact resistant with peripheral optical vision of 220 degree’s (110 on the left and right). The natural field of vision is greater than the 70% specified of EN136:2008 standards.
• One size mask body: Accommodates small to large facial size’s
• Temperature: Designed to withstand temperatures of up to 70 ± 3˚
• Light weight dual filter cartridge system evenly distributes weight of mask and cartridges on the face.